• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • CAS No.: NA
  • Other Names: Epoxy Resin
  • MF: Mixture
  • EINECS No.: NA
  • Place of Origin: Istanbul, Turkey
  • Classification: Double Components Adhesives
  • Main Raw Material: Epoxy
  • Usage: Construction
  • Brand Name: BAUMERK
  • Model Number: EPOX 311
  • Type: Two Component

Packaging & Delivery

Packaging Details A, B ve C = 8 kg Set
Delivery Time 3-5 DAYS


EPOX 311 is an epoxy based, two component, adherence bridge between old and new concrete, solvent free adhesive.

Fields of Application

Concrete, natural stone, brick, wood, steel and metal surface,

Adhesion between old and new concrete,

Stabilizing the windows and doors,

Bonding ceramic, tiles, granites on surfaces.

Features and Benefits

Excellent adhesion on concrete and steel.

Solvent free.

Has high load carrying capacity.

Excellent mechanical and chemical resistance.

Can be applied without primer.

Cannot be affected instant temperature changes.

Technical Data




Mixture Density

Solid Content


Compressive Strength (TS EN 196)


Flexural Strength (TS EN 196)


Tensile Strength (BS 6319-7)


Elasticity Modulus (TS EN 13412)

Adhesion Resistance


Application/Substrate Temperature

Service Temperature

Pot Life

Drying Time

Fresh concrete pouring

Full curing

HS Code

Component A: Epoxy Resin

Component B: Epoxy Hardener


1,55 g/cm3


8500 cps

>50 N/mm2 (1 day)

>80 N/mm2 (7 days)

>20 N/mm2 (1 day)

>30 N/mm2 (7 days)

>20 N/mm2 (1 day)

>30 N/mm2 (7 days)

>5000 N/mm2 (28 days)

>3 N/mm2 (on concrete) (7 days)

>3,5 N/mm2 (on steel) (7 days)

+10°C to +30°C

-30°C to +80°C

60 minutes


Min 5 min / Max 40 min

7 days


Application Procedure

Preparation of Substrate

Application surface must be dry, sound, fully cured, clean and clean off materials which prevent bonding, such as dust, oil, rust and remove loose pieces. Surface must be roughened mechanically by blasting, milling or sanding before application.

Application Method

Component A and B are stirred separately under low speed mixer, then Component B is poured into the Component A and mixed together for 3-4 minutes until obtaining homogenous mixture. Mixture must be applied in 30 minutes. Mixture should be applied on the surface with using a trowel or spatula as 0,5 - 1 mm thickness. Parts should to be bonded to each other by pressing them and waited stably until curing the adhesive. The product would be completely cured in minimum 7 days. During the application, ambient and surface temperatures should be between +10°C and +30°C. It is not recommended to application on rainy, windy and frost days. After application, the material should be protected from direct contact with water for a minimum 24 hours.


0,60 kg/m2. Recommended coating thickness is min. 0,5 mm / max. 30 mm.


A component: 5 kg + B component: 2,5 kg = 7,5 kg set

Shelf Life

18 months in original, unopened package.


Store in dry area between +5°C and +35°C. Protect from heat, freezing and direct sunlight.

Cleanup Information

Clean tools and equipment with industrial type solvents immediately after use. Dried material can only be removed mechanically.

Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview


Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
Supplier Assessments:
The supplier supports Trade Assurance – A free service that protects your orders from payment to delivery.
Supplier's Trade Assurance Limit: US $
Learn More